Menu
  1. Motor
  2. Battery
  3. Controller
  4. Frames
  5. Suspension
  6. Brakes
  7. Tyres
  8. Other
QS V3 Custom Modified (Black New Version)

Speed: 24*5T 9.03 kv, 30x4T 11 kv, 17x7T 6kv
650@80v = 60mph on a 16" Moto Wheel
Clamping Width (150mm) 14mm English thread for single-speed Freewheel
150mm axel width
2 sets of Hall sensors for redundancy, temp sensor, and thick 10AWG phase wires to handle high power
50mm wide magnets
Aluminum core
Hardened Steel axle
36 X Spoke Hole OD 4.2mm
Two Halls(One for spare, in case of damage) , 10mm² Phase wire
Thermic Probe: KTY 83
Support regenerative braking & Reverse function
Waterproof grade: IP54
Efficiency: ≥87%
10mm Axle flats
Net Weight: 12.75kg, Gross Weight 14.5kg
Package: 34cmX34cmX33cm

   
Panasonic 18650PF Li-Ion
TECHNICAL DETAILS: Panasonic 18650PF Li-Ion, 74v 43.5Ah, 20s 15p, 3 kWH, 14.9kg/32.8lb
 
   
Kelly

General Specifications:
•Frequency of Operation: 20kHz.
•Standby Battery Current: < 0.5mA.
•5V or 12V Sensor Supply Current: 40mA.
•Controller supply voltage range: PWR, 18V to 90V for controllers rated equal or lower than 72V.
•Supply Current, PWR, 30mA Typical.
•Configurable battery voltage range, B+. Max operating range: 18V to 1.25*Nominal Voltage.
•Standard Throttle Input: 0-5 Volts(3-wire resistive pot), 1-4 Volts(hall active throttle).
•Throttle Input: 0-5 Volts. Can use 3-wire pot to produce 0-5V signal.
•Main Contactor Coil Driver<2A.
•Full Power Operating Temperature Range: 0℃ to 70℃(MOSFET temperature).
•Operating Temper ature Range: -40℃to 100℃ (MOSFET temperature).
•Motor Current Limit, 20 seconds boost: 300A ,depending on the model.
•Motor Current Limit, continuous: 120A ,depending on the model.
•Max Battery Current :Configurable.

 250 USD
BMS

Smart bms, programmable.
10-30S
150A Max
Cable/Bluetooth connection



















150 USD
Power watcher

The device is designed for measuring of current, voltage, speed,
temperature and parameters which serve as functions
of the following data: power, energy consumption,
cycles quantity, mileage etc.


















 100 USD
Vector frame

General:
Weight: 12 kg
Width: 12.5cm (Composite body panels), 17.5cm (ABS body panels) (adjustable)
Material: High strength steel tubes
Dropouts 135mm or 155mm (adjustable)
Battery-size max dimensions: 35cm x 25cm
Bike seat or Moto seat option (adjustable)
Max rider load 150kg
Braking point 1000kg
Gears: freewheel or gear cassette (adjustable)
IS brake mount point
Rear suspension 190-220mm (adjustable)
Wheels: max26” or 26”fatbike with fat bike swingarm (up to 40cm radius)
Seatpost: 31, 6 mm
Headset: 1 ⅛” or 1,5” (adjustable)

 
Vector light frame

General:
Weight: 5.9 kg
Width: 12cm
Material: High strength steel
Dropouts 135mm
Battery-size max dimensions: 44.5cm x 11.5cm x 9cm
Bike seat
Max rider load 120kg
Gears: freewheel or gear cassette (adjustable)
IS brake mount point
Rear suspension 190-240mm (adjustable)
Wheels: max26” (up to 35cm radius)
Seatpost: 31, 6 mm
Headset: 1 ⅛” or 1,5” (adjustable)



 
Fatbike swing arm

General:
Dropout width: 135mm or 155mm
Maximum rear wheel radius: 400mm














 
Vortex

General:
Weight: 16 kg
Material: High strength steel
Motocycle seat
Max rider load 150kg
IS brake mount point
Rear suspension 190-240mm (adjustable)
Headset: 1 ⅛” or 1,5” (adjustable)

   
USD-8A

Weight:3.3 KG ( 2.26 lb)
Wheel size: 24 / 26 / 27.5 inch
Travel:203 mm ( 8 inch)
Steerer tube:28.6 mm (1.13 inch) 1-1/8” to 1.5” (Taper)AL-7075
Drop out/Crown material : Forging, AL-6061
Outer Tube:42 mm / AL- 6061
Inner Tube:35mm / AL-7075 Dark Hard Anodized
Down tube: 20 mm ( 0.79 inch ) Axle x110mm Thru-axle Design AL-7075
Features:Inverted fork
Inner structure:Air spring
Adjustments:Preload / Rebound / Air Pressure Adjustable
Barke type:Disc only ( Post mount)
Riding style:DH

DNM Volcano USD-6

Weight:2.2 KG ( 4.85 lb )
Damping:3-system
Travel: 160 mm
Dimensions:26 / 27.5
Adjustments:Rebound / Lock out / Adjust High Pressure
Stanchion:35 mm / AL-7075
Brake type:Disc brakes(Is mount)
Down tube: 20 mm Axle x 110 mm.
Features:Single air spring / Inverted fork / 1 1/8" Steerer tube
Crown:AL-6061
Leg material:AL-6061
Riding style:AM / FR

 
DNM Volcano USD-6 / FAT BIKE

Weight:2.5 KG ( 5.5 lb )
Damping:3-system
Dimensions:26
Travel:120mm
Down tube:15 mm Axle / 150 mm
Adjustments:Rebound / Lock out / Adjust High Pressure
Stanchion:35 mm / AL-7075
Brake type:Disc brakes (IS mount )
Down tube:15 mm Axle / 150 MM
Features:Single air spring / Inverted fork / 1 1/8" Steerer tube
Crown:AL-6061
Leg material:AL-6061
Riding style:Desert.snow ground

 
RCP-2
ADJUSTMENTS: Rebound/Compression/Preload/ Adjust high pressure
LENGTH / TRAVEL: • 190*44mm(7.48*1.73inch) • 200*49mm(7.87*1.93inch) • 210*54mm(8.26*2.12inch) • 220*59mm(8.66*2.32inch) • 240*69mm(9.45*2.71inch)

 







   
Tektro Auriga e-Twin

System - Hydraulic Disc Brake With Sensor Control Design
Piston - Open system, Dual piston
Material- Forged aluminum lever / Cast aluminum bracket
Rotor Weight - 128 grams
Fluid Tektro mineral oil
Pads High performance metal ceramic compound
Weight 542 gram / whee1
(Excludes rotor, adapter & mounting bolts)
Also Available Rotor: Ø203 mm









Tektro Dorado e-brakes

System - Hydraulic Disc Brake With Sensor Control Design
Piston -  Open system, Dual piston
Material -  Forged aluminum lever / Cast aluminum bracket
Lever Blade - 4 finger blade with ball end
Hose Length Front: 750 mm / Rear: 1500 mm
Rotor TR180-17: Ø203 mm ( Wave )
Rotor Weight 193 grams
Adapter DO4.0 Series
Fluid Tektro mineral oil
Pads High performance metal ceramic compound
Weight Front wheel: 368 grams
Rear wheel: 338 grams
Also Available Rotor: Ø203 mm
Thickness: 2.3 mm 


Tektro Zurich brakes

Rotor Wave Type
High Heat Dispersion & Heat Tolerance
Diameter: Ø203mm
Lever Forged Lever / Cast Aluminum Bracket
Can be combined with I-Spec II® or Matchmarker®
Reach adjustment
Two Pieces Bracket
4 Finger Blade
Finish : Black
Caliper 4 Piston Rorged Aluminum Body
Easy Pads Replace From Top
Finish: Black
Pads Q10YS
High Performance Metal Ceramic Compound
Fluid Non-Corrosive Mineral Oil
Excellent Heat Expansion Properties
Weight Front Wheel - 261 Grams / Rear Wheel - 281 Grams
( Excludes Rotor, Adapter & Mounting Bolts )

Orion 4P 

Rotor Wave Type
High Heat Dispersion & Heat Tolerance
Diameter : Ø203mm
Lever Forged Lever / Cast Aluminum Bracket
Reach adjustment
Two Pieces Bracket
Finish : Black
Caliper 4 Piston Rorged Aluminum Body
Easy Pads Replace From Top
Finish: Black
Pads Q10YS
High Performance Metal Ceramic Compound
Fluid Non-Corrosive Mineral Oil
Excellent Heat Expansion Properties
Weight Front Wheel - 261 Grams / Rear Wheel - 281 Grams
( Excludes Rotor, Adapter & Mounting Bolts)

 

   
Moto rim tyre
18" x 3.0"
 
   
PAS 
 
Twist throttle 
 
Buttons 
 
Headset 
 
Spacers 
 
Disc front hub 
 
Motoseat

Suits up to 150 kg and may be interchangeable with a standard seat.

 
Kickstand 

Made of stainless steel. Suits every frame and bike model from Vector

 
Charging port connector with a cap 

 

 
 
 
 
Seat post  

Exclusive anti-roll spin of structure with safe steady.
Single tube with separate air / oil system, Adjustments air pressure.
7050 tube material, excellent machining, and smooth adjustment.
Easy adjust saddle could change suitable stepping length while over up / down
hill, do not need to adjust height by stopping bike.
Weight:0.59 KG / 1.30 lb (by remote control)
Maximum lockout force:5 Nm
Seat tube maximum insert length:170 mm ( 6.69 inch )
Seat tube minimum insert length:90 mm ( 3.54 inch )
Available in manual and remote adjustment.
Color:Black

 
Freewheel 

Top quality screw-on freewheels for discerning single speed riders looking for super quick pick-up
High-strength Cr-Mo body and cog
CNC 3/32” Cr-Mo teeth (can take 3/32 or 1/8” chains)
18T Standard R/H threaded
Black Oxide finish

 
Wide  ABC sidecovers  

Maximum battery width with ABC sidecovers: 170mm

 
Controller tray  

Mounted on four bolts, is used to protect controller from mechanical damage.

 
Rear shock mounting bolt  
 
Rear shock support mount  
 
Spacer for caliper  
 
Spacer for rotor  
 
Spacer for the motor axle  
 
Vector Electric Bikes | Mature mechanical solutions combined with the advanced technology of electric components and more customer choices make the Vector
E-bike one step ahead of everyone else. Vector is e-bike without compromise.
     - VORTEX
   - STORM 
   - TYPHOON
PHOTOS
VIDEOS 
COMPONENTS
ABOUT
CONTACT
ORDER
Copyright 2018. Vector. All Right reserved.